XYM10 Hydraulic Rotating Cathead
Used for break-out and make-up operation for drilling rig. Our Catheads are named by actual output tensile force.
For the time being,main series is:3T,5T,10T,16T etc.(respectively corresponding 30 kN,50 kN,100 kN,160 kN).
From type the cathead consists of step cylinder type and drum-type driven by hydraulic motor. The step cylinder type cathead can be divided into head-fixed type and head-swing type(rotated with change of tensile force direction),working pressure are 16MPa,21MPa for each.
We can supply following products according to requirements from the Customer:
● Hydraulic cathead suitable for desert drilling rig, marine drilling rig borne with serious corrosion.
● Hydraulic cathead for low temperature resistant drilling rig in polar region.
● Suppressed rope end of no-rotating wire rope with the 3rd party authentication and certificate.
Technical parameter:
1 Rated working pressure 16MPa
2 Rated flow 120L/min
3 Wire rope specification GB1102-74 multi-layer strands wire rope18×7-20-170-I
Length20meter,The layer number of rope 3
4 The second layer of wire rope traction 105N
5 Second wire rope speed 9m/min
