Tong Dies and Slip Inserts
Introduction:
The manual tong dies and slip inserts are made of high-quality alloy steel. They are chemically heat-treated for surface hardness.
They are wear-resisting and corrosion-resisting and they have a long service life. We can also design and manufacture specia.
Technical Specification:
| Description of Suitable Products | Suitable OD |
| ZQ100 Hydraulic pneumatic Tongs | 3 1/2-8 |
| ZQ50 Hydraulic pneumatic Tongs | 73-160mm |
| ZQ20 Hydraulic pneumatic Tongs | 2 1/2-3 1/2 |
| Q33/8-123/4/75 Drilling Tongs | 3 3/8-12 3/4 |
| Q22/8-103/4/35 Well Repair Tongs | 2 3/8-10 3/4 |
| Q133/8-251/2/35 Casing Tongs | 13 3/8-25 1/2 |
| TQ35 Hydraulic Casing Tongs | 5 1/2-13 3/8 |
| TQ16 Hydraulic Casing Tongs | 4-7 |
| TQ20 Hydraulic Casing Tongs | 4-13 3/8 |
| W-SDS Drill Pipe Slips | 2 3/8-4 1/2 |
| W-SDML Drill Pipe Slips | 2 3/8-5 1/2 |
| W-SDXL Drill Pipe Slips | 3 1/2-5 |
| ZC31/2-5 Drill Pipe Slips | 3 1/2-5 |
| ZC5-7 Drill Pipe Slips | 5-7 |
| W31/2/75(125)Slips for Drill Pope Running | 2 3/8,2 7/8,3 1/2 |
| W5/75(120,200)Slips for Drill Pope Running | 4,4 1/2,5 |
| WT Slips for Drill Pope Running | 4 1/2-11 3/4 |
| DCS-S Slips for Drill Pope Running | 3-4 7/8 |
| DCS-R Slips for Drill Pope Running | 4 1/2-7 |
| DCS-L Slips for Drill Pope Running | 6 3/4-14 |
| 8 Slips for Drill Pope Running | 8 |
| 9 Slips for Drill Pope Running | 9 |
| Casing Pipe Slips | 6 5/8-30 |
| WA-C Safety Pipe Slips | 3 1/2-15 5/8 |
| WA-T Safety Pipe Slips | 1 1/8-4 1/2 |
| YQ3 Oil Pipe Power Tongs | 60-89 |
| YQ6 Oil Pipe Power Tongs | 73-114 |
| YQ12 Oil Pipe Power Tongs | 73-141mm |
