Non Slip Mat For Rotary Table Model ZP175/ZP275/ZP375/ZP205 Drilling Rig Spare Parts
Drill floors requires an extreme level of safety. Especially securing friction on the deck is a high priority as mud, grease, oil, water, etc, creates a very slippery milieu. Mats of rig floor we manufactured mainly used in oilfield, engineering construction, etc. The rig floor mat is made of Polyurethane ( PU ) Rubber + Steel Nails. Compared to other common drill mat, such as riffled plate, wood plate, etc, the drill rig mat has great features of anti-slip. The surface of drilling floor mat designed with vertical and horizontal arranged sewage notch, the oil fouling and water spots can discharged timely.
Main Features.
1) Available in any color with identified danger zones. ( Yellow, Red color )
2) Aggressive aggregate embedded to create traction enhanced surface.
3) Carton steel or SS nails embedded for added traction.
4) Very durable and resistant to fluids.
5) Channels in the surface allow for fluid run off .
6) Custom service according to onsite requirements.
|
tem
|
Parameters | ||
| Break Strength / MPA | 50 | ||
| Elongation at Break. % | 550 | ||
| Hardness ( Shore A ) |
93 +/- 3
|
||
| Tearing Strength.Kn/m | 105.0 | ||
| Rebounding. % | 20 |
| Model | Length. mm | Width. mm | Diameter of Center Bore. mm | Width/mm |
| ZP - 175 | 1690 | 1280 | 780 | 30 |
| ZP - 205 | 2000 | 1490 | 830 | 30 |
| ZP - 275 | 2100 | 1670 | 1050 | 30 |
| ZP - 375 | 2205 | 1810 | 1290 | 30 |
