SERVA QPE 1600 Quintuplex Plunger Pump
The QPE 1600 is a reciprocating, horizontal single-acting, quintuplex plunger pump for continuous well service, which is rated at 1600 brake hp input maximum.
The pump is good at cementing, acidizing, fracturing, and other conventional services, especially for long-time coiled tubing service.
The North American market is available in a dual-pump arrangement with a single power of up to 3,200 HP and a maximum working pressure of 20,000 PSI.
| Specifications | |
| Rated Maximum Brake Horsepower | 1,600 bhp (1,192 Kw) |
| Maximum Rod Load | 146,000 lbf (65,700 kg) |
| Stroke Length | 8”(203.2 mm) |
| Gear Ratio | 6.133:1 |
| Length (Approximate) | 1” (1 mm) |
| Width (Approximate) | 1” (1 mm) |
| Height (Approximate) | 1” (1 mm) |
| Pump Weight | 4,000 Kg (8,900 lbs) |
Major Features:
Adopting FACET™ technology and UltraLast™ stainless steel fluid cylinder to improve service life of fluid cylinder by 400%.
Imported packing and homemade top-performance packing are available, which can be interchanged with packing of the same specification in the market.
Wearing parts can be interchanged with similar mainstream products.
Suction and discharge connections can be custom designed as required by customers.
Gear reduction box capable of rotating in 12 different angles is available.
Crosshead and push rod are designed to prevent mud from entering into the power end.
Strength of integrally forged connecting rod is 50% higher than that of conventional connecting rod.
The improved design of crosshead increases the contact area of the joint bearing by 38% and greatly improves the service life of the crosshead.
