Send Message

Always Terrific Offer

Home ProductsSolid Control Equipment Drilling

320m3/h Drilling Solid Control System 3hp Centrifugal Mud Pump

320m3/h Drilling Solid Control System 3hp Centrifugal Mud Pump

  • 320m3/h Drilling Solid Control System 3hp Centrifugal Mud Pump
  • 320m3/h Drilling Solid Control System 3hp Centrifugal Mud Pump
  • 320m3/h Drilling Solid Control System 3hp Centrifugal Mud Pump
320m3/h Drilling Solid Control System 3hp Centrifugal Mud Pump
Product Details:
Place of Origin: CHINA
Brand Name: ATO
Payment & Shipping Terms:
Packaging Details: wooden box
Payment Terms: T/T, L/C
Contact Now
Detailed Product Description
Model: 50-160A Weight: 75kg
Size: 370*525*250mm Power: 3 Hp (2.2kW)
High Light:

320m3/H Centrifugal Mud Pump


3hp Centrifugal Mud Pump


Solid Control Centrifugal Mud Pump

Drilling Mud Solids Control Equipment_Centrifugal Pump




  1. The centrifugal pump has the horizontal structure. The diameter of the inlet and outlet are the same. If a protective cover is added, it can be used in the open air.
  2. It is easy to install and maintain. No need to dismantle pipeline system, just lifting off the conjunction flat nut of vertical pump. Then all the rotor parts can be taken out.
  3. Horizontal centrifugal pump can be operating in series and parallel connection according to the requirements of flow and head.
  4. The installation angle of pump outlet can be 0°, 90° and 180° to meet different connection occasions.



Tips: How to confirm the flow of the centrifugal pump?

The flow is the amount of liquid delivered per unit time. Its most universal unit is m3/h or gpm. After calculation, 1m3/h=4.4gpm. It represents the centrifugal pump can deliver liquid 1m3 per hour or 4.4 gallons per minute.
If the design institute provides the normal flow, minimum flow, and maximum flows together. The maximum flow shall be regarded as the basis in model selection, with the normal flow being taken into account. When there is no maximum flow, 1.1 times the normal flow can be taken as the maximum flow.

If there is no calculation of the design institute, it can calculate by the daily infusion volume divided by the pump working time. For example, if you need to transport liquids 80-100 m3 per day and the working time is 10 hours, then the pump flow is 8-10m3/h.
If the flow indicated on the nameplate is the rated flow of centrifugal pump, that is, the intermediate value of the flow. The working efficiency of the water pump under this flow data is the highest. If it deviates from this flow during use, the efficiency of the water pump will be greatly reduced. If the deviation is rather serious, the motor will be burn out. For example, the rated flow of a pipeline centrifugal pump is 100m3/h (440 gpm). In actual use, the flow of the pump is preferably set as this data. If the flow exceeds 120m3/h (528 gpm), special attention should be paid to whether the motor current has exceeded the current data indicated on the pump nameplate. If the current goes beyond the rated value, the opening of the pump outlet valve should be used to control the flow of the pump in the rated flow range. In order to save energy and reduce the operation cost, the flow of the centrifugal pump should be run under the designed flow position as much as possible.





Model Flow(m³/h) Lift(m) Power(Kw) Motor Speed(RPM) Impeller(Inch)
KWB8×6C-14J 320m3/h 35m 75kW 1450RPM(50Hz) 14in
KWB8×6C-12J 1750RPM(60Hz) 12in
KWB8×6C-13J 272m3/h 35m 55kW 1450RPM(50Hz) 13in
KWB8×6C-11J 1750RPM(60Hz) 11in
KWB6×5C-13J 200m3/h 35m 45kW 1450RPM(50Hz) 13in
KWB6×5C-10J 1750RPM(60Hz) 10in
KWB6×5C-12J 150m3/h 30m 37kW 1450RPM(50Hz) 12in
KWB6×5C-9.5J 1750RPM(60Hz) 9.5in
KWB5×4C-13J 120m3/h 35m 30kW 1450RPM(50Hz) 13in
KWB5×4C-11J 1750RPM(60Hz) 11in
KWB5×4C-12J 90m3/h 30m 22kW 1450RPM(50Hz) 12in
KWB5×4C-10J 1750RPM(60Hz) 10in
KWB4×3C-13J 65m3/h 35m 18.5kW 1450RPM(50Hz) 13in
KWB4×3C-12J 1750RPM(60Hz) 12in
KWB4×3C-12J 55m3/h 28m 15kW 1450RPM(50Hz) 12in
KWB4×3C-10J 1750RPM(60Hz) 10in
KWB4×3C-11J 45m3/h 25m 11kW 1450RPM(50Hz) 11in
KWB4×3C-9.5J 1750RPM(60Hz) 9.5in
KWB3×2C-10J 35m3/h 35m 7.5kW 1450RPM(50Hz) 10in
KWB3×2C-9J 1750RPM(60Hz) 9in





















Contact Details

Contact Person: Jack Yang

Tel: 0086 18291452987

Send your inquiry directly to us
Other Products