Hydraulic Transmission 1491KW 2000HP Frac Pump Truck

Frac Pump Truck/JYYLC105-1491 Maximun Working Power 1491KW(2000HP)

JYYLC105-1491 (2000) fracturing truck

A, product type and name

Product type: JYYLC105-1491 type

JY - enterprise code (Jingzhou Jianghan JIAYE Petroleum Machinery Co. Ltd.)

YLC said fracturing car

105 -- said the car the maximum working pressure of 105MPa

1491 -- said the car maximum water power 1491KW (2000HP)

Two, the main technical performance parameters

The 2.1 main dimensions:

Length: < 12000mm

Overall height: < 4050 mm

Total width: 2500 mm

2.2 of the total weight:

Weight: 36000 kg~38000 kg

2.3 main components:

The car engine

Chassis

The hydraulic transmission box

Transmission shaft

Horizontal plunger pump

Hydraulic system

Lubrication system

The gas path system

Cooling system

Operation control (remote control) system

Manifold system

Three, the main configuration

3.1. automobile chassis:

To meet the requirements of the chassis load distribution, load the actual load is smaller than the front bridge and bridge and the left and right side. The vehicle has the seismic performance and off-road performance is enough, can adapt to variousoil and gas field China highway and ordinary highway.

Model: the North Pennines chassis ND1314D47J7 8X4

3.2. car engine:

Model: Cummins K50-G8

The engine power of KW (HP): 1678 (2250) (1950r/min)

3.3 hydraulic transmission box:

Model: BY2000

The maximum input power of KW (HP):1678 (2250)

Maximum speed (r/min):2100.

3.4 engine / gearbox installation

Engine / gearbox and automobile chassis using isolation installation, the use ofrubber pad isolation. Engine / gearbox are connected into a single unit, with threemounting, a flexible mounting points on the front, two flexible mounting points on the back.

The 3.5 drive shaft:

The transmission case and the fracturing pump transmission shaft is connectedwith a standard. The transmission shaft is provided with a detachable protecting cover, in order to facilitate the operation in the hands of the maintenance pump hydraulic end can be flexible rotation transmission shaft.

On the drive shaft assembly and fracturing pump input flange mounted a viscous damping silicone oil shock absorber, with no compression protects the engine and gearbox vibration effect of fracturing pump.

The 3.6 fracturing pump:

Pump manufacturing, in accordance with the ISO9001 quality standard.

3.6.1 power end

3.6.1 power end

5ZB-1860L (JY-2500) five cylinder plunger pump:

Rated input power: 1860 kW (2500HP)

The maximum link load (Jing Zaihe): 192325LBS (87239kg)

The stroke length: 8"

Piston diameter: 4 ", 4 1/2", 5"

Gear ratios: 6.353:1

The maximum input power: 1678kW (2250HP)

The stroke length: 8"

The fluid end mainly by the pump head body, suction and discharge valve assembly, piston, packing, valve and valve seat and other components, in thesuction port is provided with a suction air regulator.

The plunger surface spraying wear-resistant alloy powder, with wear resistance andgood corrosion resistance.

The plunger seal composed of V shaped packing, packing pressure ring and apacking ring, arrangement.

Under the hydraulic end, provided with a work platform.